SST25PF040C数据手册集成电路（IC）的存储器规格书PDF

描述 Description

The 25 series Serial Flash family features a four-wire,SPI-compatible interface that allows for a low pin-countpackage which occupies less board space and ultimatelylowers total system costs. The SST25PF040C devices are enhanced with extended operating voltage of 2.3-3.6V. SST25PF040C SPI serial flash memories are manufactured with proprietary,high-performance CMOS SuperFlash technology.The split-gate cell design and thick-oxide tunnelinginjector attain better reliability and manufacturabilitycompared with alternate approaches.

特性 Features

Single Voltage Read and Write Operations- 2.3–3.6V
Serial Interface Architecture- SPI Compatible: Mode 0 and Mode 3
Dual Input/Output I/O Support
High Speed Clock Frequency up to 40 MHz
Endurance: 100,000 Cycles (typical)
Greater than 20 years Data Retention
Active Read Current: 5 mA (typical)
Standby Current: 5 µA (typical)
Power-down Mode: 3µA (typical)
Uniform 4 KByte sectors
Uniform 64 KByte overlay blocks
Sector-Erase Time: 40 ms (typical)
Byte-Program Time: 4 ms/256 bytes (typical)
Page Program Mode - 256 Bytes/Page
End-of-Write Detection- Software polling the BUSY bit in Status Register
Hold Pin (HOLD#)- Suspends a serial sequence to the memorywithout deselecting the device
Write Protection (WP#)- Enables/Disables the Lock-Down function of the status register
Software Write Protection- Write protection through Block-Protection bits instatus register
Temperature Range- Industrial: -40°C to +85°C; Extended: 40°C to +125°C
Automotive AEC-Q100 Grade 1 and Grade 3 qualified
8-lead SOIC (150 mils)
8-contact WDFN (6mm x 5mm)
8-contact USON (2mm x 3mm)
All devices are RoHS compliant

简介

SST25PF040C属于集成电路（IC）的存储器。由制造生产的SST25PF040C存储器存储器是集成电路上用作数据存储设备的半导体器件。这些器件分为非易失性或易失性两种，格式包括 CBRAM、DRAM、EEPROM、EERAM、EPROM、闪存、FRAM、NVSRAM、PCM (PRAM)、PSRAM、RAM 和 SRAM。这些器件的存储容量为 64 b 至 6 Tb 不等，接口有 I2C、MMC、并行、eMMC、串行、单线、SPI、UFS、Xccela 总线和 1-线。