点阵双稳态显示驱动IC

SSD1603 is a single-chip CMOS bistable display driver with controller for dot-matrix type bistable display. It consists of high-voltage driving outputs for driving maximum 132 Segments x 64 Commons. Charge Pump, On-Chip Oscillator and Bias Divider are built in for minimal system area. ·Power supply\n - VDD = 2.4V to 3.5Vfor IC logic and analog\n - V0= 14.0V to 35.0Vfor Panel driving\n - VDDIO= 1.6V to VDDfor MCU interface\n·Resolution: 132 x 64 dot matrix panel\n·Extra 2 dummy segments and 2 dummy commons for dummy ITO area driving\n·On chip 132 x 64 bit graphic display RAM\n·Cha;

Solomon

晶门半导体

SAW Filter 422.2 MHz

文件：168.49 Kbytes 页数：6 Pages

TAI-SAW

嘉硕科技

SAW Filter 422.2 MHz

文件：428.27 Kbytes 页数：6 Pages

TAI-SAW

嘉硕科技

Molded, Dual-In-Line Thin Film Resistor, Through-Hole Network

FEATURES • Standard rugged, molded case construction (14 pins and 16 pins) • Highly stable thin film (500 ppm at +70 °C at 2000 h) • Low temperature coefficient (± 25 ppm/°C) • Compatible with automatic insertion equipment • Standard isolated pin one common schematic • Isolated and bussed

文件：91.03 Kbytes 页数：4 Pages

VishayVishay Siliconix

威世威世科技公司