SIGNAL RELAY

FEATURES • 3~24 Vdc coil voltage • 200 mW coil power • contact form 1C

文件：468.96 Kbytes 页数：5 Pages

CUI

SIGNAL RELAY

FEATURES • 3~24 Vdc coil voltage • 200 mW coil power • contact form 1C

文件：386.09 Kbytes 页数：5 Pages

SAMESKY

Low Capacitance ESD array

Feature ● Lead free as Standard ● ESD Protection:Level 4 ● Low clamping voltage ● Protection one power line and two data lines Applications ● USB power & Data line protection ● Portable electronics ● Video/graphic cards ● WAN/LAN Equipment ● Ethernet=10/100/1000 base T

文件：720.28 Kbytes 页数：5 Pages

FUTUREWAFER

STEERING DIODE ARRAY

DESCRIPTION The SR70 is an ultra low capacitance steering diode array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients (EFT) and secondary lightning threats, this device is ideal for use in high-speed signal interface application such as USB, microprocess

文件：207.65 Kbytes 页数：3 Pages

PROTEC

STEERING DIODE ARRAY

FEATURES ✔ ESD Protection > 40 kilovolts ✔ 225 Milliwatt Continuous Power Dissipation ✔ Provides Two (2) Lines of Protection ✔ Low Leakage Current

文件：75.79 Kbytes 页数：3 Pages

PROTEC

RailClamp짰 Low Capacitance TVS Diode Array

Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR70 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over-voltages caused by ESD (electrostatic discharge), EFT (electrica

文件：158.32 Kbytes 页数：6 Pages

SEMTECH

先之科

SR70 Series 70V 40A Diode Array

Description The SR70 consists of four, low capacitance, rail-to-rail diodes that provide protection against ESD and lightning surge events. These robust diodes can safely absorb up to 40A (tP=8/20μs) and repetitive ESD strikes at the maximum level (Level 4) specifed in the IEC 61000-4-2 internati

文件：817.61 Kbytes 页数：4 Pages

Littelfuse

力特

70 Volts ESD Protector

Features • Halogen free available upon request by adding suffix -HF • IEC 61000-4-5(Lightning) 1kv,24A( 8/20us) • IEC 61000-4-2(ESD) 15kv(air), 8kv(contact) • Low Clamping Voltage • Unidirectional Configuration • Protects 2 I/O Ports & Power Supply • Low Capacitance • Epoxy meets UL 94

文件：301.42 Kbytes 页数：4 Pages

MCC

USB 2.0 power and data line

Features ● Ultra low leakage: nA level ● Operating voltage: 70V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightn

文件：150.27 Kbytes 页数：3 Pages

LEIDITECH

雷卯电子

RailClamp짰 Low Capacitance TVS Diode Array

Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR70 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over-voltages caused by ESD (electrostatic discharge), EFT (electrica

文件：158.32 Kbytes 页数：6 Pages

SEMTECH

先之科