SR10

SIGNAL RELAY

FEATURES •3~24Vdccoilvoltage •450mWcoilpower •contactform2C

SR10

SIGNAL RELAY

FEATURES •3~24Vdccoilvoltage •450mWcoilpower •contactform2C

SR10

Capacitor-Coupled, Switched Shunt, (CCSS) Regulator; • Efficiencies up to 75% at 20mA\n• Less than 20mW standby power\n• Optional 6.0V, 12V or 24V fixed output voltage, or adjustable from 6.0V to 28V\n• Output current scalable up to 50mA\n• 120VAC to 240VAC input\n• No magnetics\n• Inherent short circuit protection;

SR10 is a non-isolated, capacitor-coupled, switched shunt regulator designed to operate directly from the AC line. Output voltage can be either fixed at 6.0V, 12V, or 24V using an internal feedback divider or be adjusted over a 6.0V to 28V range using an external feedback divider. Output current capability is scalable to 50mA, by selection of the series coupling capacitor (CS) on the AC line. Standby power can be under 20mW, and efficiencies of 75% are possible depending upon configuration and degree of transient protection.All components except for CS are low voltage, easing PCB layout and alleviating high voltage creepage concerns.Inherent short circuit protection is afforded by the reactance of the CS series capacitor, which limits current even with a dead short on the output. Overcurrent protection (OCP) shuts off the shunt during a line transient.Refer to application note AN-H65 for further information.\n\n \n\n

SR10

Precision Current Sense Resistors

SR10

Type SR Precision Current Sense Resistors

SR1000

FAST RECOVERY,100ns. HIGH VOLTAGE 25ma,MINIATURE SILICON RECTIFIERS

FASTRECOVERY,100ns.HIGHVOLTAGE25ma,MINIATURESILICONRECTIFIERS ●SMALLSIZEDMOLDEDPACKAGE ●PRV3,000TO15,000VOLTS ●AVALANCHECHARACTERISTICS ●LOWLEAKAGE

SR1000T

1000W Pure Sine Wave Inverter

Features: PureSineWaveoutput(THD

SR1000T-124

1000W Pure Sine Wave Inverter

Features: PureSineWaveoutput(THD

SR1000T-148

1000W Pure Sine Wave Inverter

Features: PureSineWaveoutput(THD

SR1000T-224

1000W Pure Sine Wave Inverter

Features: PureSineWaveoutput(THD