SPV1050数据手册集成电路（IC）的电池充电器规格书PDF

描述 Description

The SPV1050 is an ultra-low power and high-efficiency power manager embedding four MOSFETs for boost or buck-boost DC-DC converter and an additional transistor for the load connection/disconnection. An internal high accuracy MPPT algorithm can be used to maximize the power extracted from PV panel or TEG. The internal logic works to guarantee tight monitoring of both the end-of-charge voltage (VEOC) and the minimum battery voltage (VUVP) by opening the pass-transistor at triggering of the VEOC threshold or at triggering of the VUVP threshold to preserve the battery life. Both the VEOC and VUVP thresholds can be trimmed by external resistors connected between the STORE rail and the EOC and UVP pins, respectively. In boost configuration (CONF pin connected to the supply source), the IC requires 550 mV and 30 μA to Cold start; while after the first start-up the input voltage can range between 150 mV and VEOC. In buck-boost configuration (CONF pin connected to ground), the IC requires 2.6 V and 5 μA at Cold start; while after the first start-up input voltage can range between 150 mV up to 18 V. The STORE pin is available as unregulated voltage output (e.g. to supply by external LDO a micro-controller), while two fully independent LDOs (1.8 V and 3.3 V) are embedded for powering other companion ICs like MCU, sensors or RF transceivers. Both LDOs can be independently enabled through the related pins.

特性 Features

• Transformerless thermoelectric generators and PV modules energy harvester  
• High efficiency for any harvesting source
• Up to 70 mA output current
• Fully integrated MOSFETs for Boost or Buck-boost configurations
• Selectable enable/disable MPPT functionality
• Programmable MPPT by external resistors
• 2.6 V to 5.3 V trimmable output overvoltage level (± 1% accuracy)
• 2.2 V to 3.6 V trimmable output undervoltage level (± 1% accuracy)
• Two fully independent LDOs (1.8 V and 3.3 V output)
• Enable/disable LDO pins
• Load disconnect function (by-pass transistor open) prior the first start-up (Cold Start) to avoid battery lifetime shortening
• Battery Connected and DC-DC switching open drain indication pins

简介

SPV1050属于集成电路（IC）的电池充电器。由制造生产的SPV1050电池充电器电池充电器 PMIC（电源管理集成电路）是元器件级产品系列，用于在电子设备中实现电池充电控制和充电管理功能。这些器件主要根据电池化学及其设计用于的电池数量来分类，可提供电化学电池和超级电容器安全充电所必需的电流或电压调节和监视功能。