SPC58NG84E5NTH0Y中文资料意法半导体数据手册PDF规格书

Features

• AEC-Q100 qualified

• High performance e200z4 triple core:

– 32-bit Power Architecture technology CPU

– Core frequency as high as 180 MHz

– Variable Length Encoding (VLE)

– Floating Point, End-to-End Error Correction

• 6582 KB (6144 KB code flash+ 256 KB data

flash) on-chip flash memory:

– supports read during program and erase

operations, and multiple blocks allowing

EEPROM emulation

– Supports read while read between the two

code Flash partitions.

• 608 KB on-chip general-purpose SRAM (in

addition to 160 KB core local data RAM): 64KB

in CPU_0, 64 KB in CPU_1 and 32 KB in

CPU_2

• 182 KB HSM dedicated flash memory (144 KB

code + 32 KB data)

• Multi-channel direct memory access controller

(eDMA)

– one eDMA with 64 channels

– one eDMA with 32 channels

• 1 interrupt controller (INTC)

• Comprehensive new generation ASIL-D safety

concept:

– ASIL-D of ISO 26262

– One CPU channel in lockstep

– Logic BIST

– FCCU for collection and reaction to failure

notifications

– Memory BIST

– Cyclic redundancy check (CRC) unit

– Memory Error Management Unit (MEMU)

for collection and reporting of error events

in memories

• Crossbar switch architecture for concurrent

access to peripherals, Flash, or RAM from

multiple bus masters with end-to-end ECC

• Body cross triggering unit (BCTU)

– Triggers ADC conversions from any eMIOS

channel

– Triggers ADC conversions from up to 2

dedicated PIT_RTIs

• Enhanced modular IO subsystem (eMIOS): up

to 64 timed IO channels with 16-bit counter

resolution

• Enhanced analog-to-digital converter system

with:

– 4 independent fast 12-bit SAR analog

converters

– One supervisor 12-bit SAR analog

converter

– One standby 10-bit SAR analog converter

• Communication interfaces:

– 18 LINFlexD modules

– 10 deserial serial peripheral interface

(DSPI) modules

– 8 MCAN interfaces with advanced shared

memory scheme and ISO CAN-FD support

– Dual-channel FlexRay controller

– Two independent Ethernet controllers

10/100Mbps compliant IEEE 802.3-2008

• Low power capabilities

– Versatile low power modes

– Ultra low power standby with RTC

– Smart Wake-up Unit for contact monitoring

– Fast wakeup schemes

• Dual phase-locked loops with stable clock domain for peripherals and FM modulation

domain for computational shell

• Nexus development interface (NDI) per IEEEISTO 5001-2003 standard, with some

support for 2010 standard

• Boot assist Flash (BAF) supports factory programming using a serial bootload through the

asynchronous CAN or LIN/UART

• Junction temperature range -40 °C to 150 °C

Description

The SPC584Gx, SPC58EGx, SPC58NGx microcontroller belongs to a family of devices

superseding the SPC56x family. SPC584Gx, SPC58EGx, SPC58NGx build on the legacy of

the SPC5x family, while introducing new features coupled with higher throughput to provide

substantial reduction of cost per feature and significant power and performance

improvement (MIPS per mW).