Evaluation Board Manual

DESCRIPTION... The SP50x Evaluation Board is designed to analyze the SP504 or SP505 multi-protocol transceivers. The evaluation board provides access points to all of the driver and receiver I/O pins so that the user can measure electrical characteristics and waveforms of each signal. The SP50x E

文件：132.5 Kbytes 页数：18 Pages

SIPEX

2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

文件：279.23 Kbytes 页数：9 Pages

MITEL

2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

文件：279.23 Kbytes 页数：9 Pages

MITEL

2.6GHz 3-Wire BUS Controlled Synthesiser

2.6GHz 3-Wire BUS Controlled Synthesiser The SP5054 is a single-chip frequency synthesiser designed for satellite TV tuning systems. It is a programming variant of the SP5055, allowing the design of one tuner with either I2C bus or 3-wire bus format, depending on which device is inserted. The SP5

文件：279.23 Kbytes 页数：9 Pages

MITEL

2.6GHz Bidirectional I2C BUS Controlled Synthesiser

2.6GHz Bidirectional I2C BUS Controlled Synthesiser The SP5055 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable current limited outputs and 4 addressable Bi-Directional open collect

文件：197.7 Kbytes 页数：9 Pages

MITEL

2.6GHz Bidirectional I2C BUS Controlled Synthesiser

2.6GHz Bidirectional I2C BUS Controlled Synthesiser The SP5055 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable current limited outputs and 4 addressable Bi-Directional open collect

文件：197.7 Kbytes 页数：9 Pages

MITEL

WAN Multi-Mode Serial Transceiver

DESCRIPTION... The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. Seven

文件：496.56 Kbytes 页数：36 Pages

SIPEX

WAN Multi-Mode Serial Transceiver

DESCRIPTION... The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. Seven

文件：496.56 Kbytes 页数：36 Pages

SIPEX

WAN Multi-Mode Serial Transceiver

The SP50x family of multi-protocol transceivers are designed for applications using serial ports in networking equipment such as routers, DSU/CSUs, multiplexors, access devices, and other networking equipment. This application note discusses and illustrates various configuration options, and other

文件：673.51 Kbytes 页数：35 Pages

SIPEX

WAN Multi-Mode Serial Transceiver

DESCRIPTION... The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. Seven

文件：496.56 Kbytes 页数：36 Pages

SIPEX