SP3071E

3.3V, 15kV, Failsafe RS-485/RS-422 Full-Duplex with Slew Limit; ·±15kV ESD protection for RS485 pins\n·3.3V low-power operation\n·Advanced receiver-failsafe protection for open, shorted or terminated lines\n·Up to 256 Transceivers may share bus\n·Very low load for 8x greater fan-out\n·Hot Swap glitch protection RE and DE\n·Thermal shutdown protects against driver contention\n·Available in three industry standard footprints\n·SP3070E, SP3073E and SP3076E in Full-Duplex (14 pin)\n·SP3071E, SP3074E and SP3077E in Full-Duplex (8 pin)\n·SP3072E, SP3075E and SP3078E in Half-Duplex (8 pin)\n·Three applications-optimized speed grades\n·SP3070-72E: 250kbps fully slew-limited\n·SP3073-75E: 500kbps slew-limited\n·SP3076-78E: 16Mbps high speed\n·Small form factor SO-narrow packages\n·Industrial (-40 to +85ºC) & Extended (-40 to +85ºC) temperature grades\n;

The SP3070E-3078E differential line transceivers are suitable forbidirectional communication on balanced multipoint bus transmissionlines and comply with both RS485 and RS422 EIA Standards. Each deviceconsists of a differential driver and differential receiver. All devicesoperate from a 3.3V power supply.High receiver input impedance allows a large number of transceivers toshare a common data bus while maintaining signal margin and withoutexcessive loading or use of expensive repeaters. The high impedancedriver output is maintained over the entire common-mode voltage rangefrom -7 to +12V. Receivers will failsafe to logic 1 output when inputsare open, shorted or terminated. Drivers include built-in short-circuitprotection and a thermal-overload shutdown to protect against excessivepower dissipation from bus contention or cable faults. All RS485receiver inputs and driver outputs are ESD protected up to ±15kV(Air-Gap and Human Body Model) and up to ±8kV Contact discharge (IEC1000-4-2).For technical support or help choosing a product please email Exar’s Serial Technical Support group at: serialtechsupport@exar.com.

SP3071E

짹15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071E

짹15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe

SP3071E

ADVANTAGES OF ENHANCED RECEIVER FAILSAFE FEATURES

SP3071EEN

15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071EEN/TR

15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071EEN-L

짹15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071EEN-L/TR

짹15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071EEN-LSLASHTR

짹15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

SP3071EENSLASHTR

15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers