SNJ55LBC173FK中文资料德州仪器数据手册PDF规格书

Meets EIA Standards RS-422-A, RS-423-A,

RS-485, and CCITT V.11

Designed to Operate With Pulse Durations

as Short as 20 ns

Designed for Multipoint Bus Transmission

on Long Bus Lines in Noisy Environments

Input Sensitivity . . . ±200 mV

Low-Power Consumption . . . 20 mA Max

Open-Circuit Fail-Safe Design

Pin Compatible With SN75173 and

AM26LS32

description

The SN55LBC173 is a monolithic quadruple

differential line receiver with 3-state outputs

designed to meet the requirements of the EIA

standards RS-422-A, RS-423-A, RS-485, and

CCITT V.11. This device is optimized for balanced

multipoint bus transmission at data rates up to and

exceeding 10 million bits per second. The four

receivers share two ORed enable inputs, one

active when high, the other active when low. Each

receiver features high input impedance, input

hysteresis for increased noise immunity, and input

sensitivity of ±200 mV over a common-mode input

voltage range of 12 V to –7 V. Fail-safe design

ensures that if the inputs are open circuited, the

output is always high. The SN55LBC173 is

designed using the Texas Instruments proprietary

LinBiCMOSEtechnology that provides low power

consumption, high switching speeds, and

robustness.

This device offers optimum performance when used with the SN55LBC172M quadruple line driver. The

SN55LBC173 is available in the 16-pin CDIP (J), the 16-pin CPAK (W), or the 20-pin LCCC (FK) packages.

The SN55LBC173 is characterized over the military temperature range of –55°C to 125°C.