SNJ54ABT374FK中文资料德州仪器数据手册PDF规格书

State-of-the-Art EPIC-IIBE BiCMOS Design

Significantly Reduces Power Dissipation

Latch-Up Performance Exceeds 500 mA Per

JEDEC Standard JESD-17

Typical VOLP (Output Ground Bounce) < 1 V

at VCC = 5 V, TA = 25°C

High-Drive Outputs (–32-mA IOH, 64-mA IOL)

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Package Options Include Plastic

Small-Outline (DW), Shrink Small-Outline

(DB), and Thin Shrink Small-Outline (PW)

Packages, Ceramic Chip Carriers (FK),

Plastic (N) and Ceramic (J) DIPs, and

Ceramic Flat (W) Package

description

These 8-bit flip-flops feature 3-state outputs

designed specifically for driving highly capacitive

or relatively low-impedance loads. They are

particularly suitable for implementing buffer

registers, I/O ports, bidirectional bus drivers, and

working registers.

The eight flip-flops of the SN54ABT374 and

SN74ABT374A are edge-triggered D-type

flip-flops. On the positive transition of the clock

(CLK) input, the Q outputs are set to the logic

levels set up at the data (D) inputs.

A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high

or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive

the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines

without need for interface or pullup components. OE does not affect internal operations of the flip-flop. Old data

can be retained or new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54ABT374 is characterized for operation over the full military temperature range of –55°C to 125°C. The

SN74ABT374A is characterized for operation from –40°C to 85°C.