SNJ54ABT16244WD中文资料德州仪器数据手册PDF规格书

FEATURES

Members of the Texas Instruments

Widebus™ Family

State-of-the-Art EPIC-IIB™ BiCMOS Design

Significantly Reduces Power Dissipation

Latch-Up Performance Exceeds 500 mA Per

JESD 70

Typical VOLP (Output Ground Bounce) <1 V

at VCC = 5 V, TA = 25°C

Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

Flow-Through Architecture Optimizes PCB

Layout

High-Drive Outputs (–32-mA IOH, 64-mA IOL)

Package Options Include Plastic 300-mil

Shrink Small-Outline (DL), Thin Shrink

Small-Outline (DGG), and Thin Very

Small-Outline (DGV) Packages and 380-mil

Fine-Pitch Ceramic Flat (WD) Package

Using 25-mil Center-to-Center Spacings

DESCRIPTION

The SN54ABT16244 and SN74ABT16244A are 16-bit

buffers and line drivers designed specifically to

improve both the performance and density of 3-state

memory address drivers, clock drivers, and

bus-oriented receivers and transmitters. These

devices can be used as four 4-bit buffers, two 8-bit

buffers, or one 16-bit buffer. These devices provide

true outputs and symmetrical OE (active-low

output-enable) inputs.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54ABT16244 is characterized for operation over the full military temperature range of –55°C to 125°C.

The SN74ABT16244A is characterized for operation from –40°C to 85°C.