SNC85F100E中文资料Voice Controllers数据手册Sonix规格书

描述 Description

The SNC85F E/A/D 24MHz 16-bit RISC controller series is embedded Flash controllerwith multi-channel 2/8~24 hardware Voice/MIDI Wave Processing Unit (WPU). In additionto having multi-channel hardware channels, two software high quality voice channelswith SONiX HQDPCM/Audio32 algorithm is provided. Key peripherals include a single high quality 13bit DPWM audio output, Max.31-channelcomparator for cap sensing touch, three external interrupts, Max. 31ch PWMIOs, serialperipheral interface (SPI0&SPI1),IIC TX/RX, UART TX/RX, and three 12-bit timers. Thedevice features provide idle mode for real-time clock (RTC) applications and sleepmode for power savings.The SNC85F contains a Low Voltage Detector (LVD) for power management usage.The status of internal or external power can be detected and reported to the managementsoftware. There is a Low Voltage Reset (LVR) function provided to keep the whole systemfrom losing data when voltage drops to a low level.

特性 Features

Working Voltage : 1.8V – 5.5V
• 240 seconds @12Kbps Audio32
• 28 I/O ports
• 3072*16 bits RAM
• 192K*16 Embedded Flash
- ISP (In-system program) is provided
- Max. 192K program Size
• One 13-bit ClassD PWM audio output for direct drive speaker
• Two 14-bit software channels with noise filter to play high quality sound
• Maximum 2 independent hardware voice/MIDI channels with noise filter
• System clock: 24.576M Hz
- Internal ROSC
• Low Voltage Reset
• Low Voltage Detector (LVD)
- 8 levels (2.0V/2.2V/2.4V/2.6V/2.8V/3.0V/3.2V/3.4V)
- Detect internal VDD or external voltage input
• 3 External interrupt Sources: INT0, INT1, INT2
• 28 Hardware PWMIOs
• 28 Channel Comparator for Cap-touch key
• IR function provided
• Provide regulator LDO33 for SPI Flash
• Two Serial Peripheral Interface (SPI0&SPI1)
• One I2C TX/RX
• One UART TX/RX