SN75LVDS388DBT中文资料德州仪器数据手册PDF规格书

Eight Line Receivers Meet or Exceed the

Requirements of ANSI TIA/EIA-644

Standard

Integrated 110-Ω Line Termination

Resistors on LVDT Products

Designed for Signaling Rates† Up To

630 Mbps

SN65 Version’s Bus-Terminal ESD Exceeds

15 kV

Operates From a Single 3.3-V Supply

Propagation Delay Time of 2.6 ns (Typ)

Output Skew 100 ps (Typ)

Part-To-Part Skew Is Less Than 1 ns

LVTTL Levels Are 5-V Tolerant

Open-Circuit Fail Safe

Flow-Through Pin Out

Packaged in Thin Shrink Small-Outline

Package With 20-mil Terminal Pitch

description

The ‘LVDS388 and ‘LVDT388 (T designates

integrated termination) are eight differential line

receivers that implement the electrical characteristics

of low-voltage differential signaling (LVDS).

This signaling technique lowers the output voltage

levels of 5-V differential standard levels (such as

EIA/TIA-422B) to reduce the power, increase the

switching speeds, and allow operation with a 3-V

supply rail. Any of the eight differential receivers

will provide a valid logical output state with a

+100-mV differential input voltage within the input

common-mode voltage range. The input

common-mode voltage range allows 1 V of

ground potential difference between two LVDS

nodes. Additionally, the high-speed switching of

LVDS signals always require the use of a line

impedance matching resistor at the receiving end

of the cable or transmission media. The LVDT

product eliminates this external resistor by

integrating it with the receiver.