SN75LVCP600SDSKTG4中文资料德州仪器数据手册PDF规格书

1 Features

1• Single 3.3-V Supply

• Suitable to Receive 6-Gbps Data Over up to >40

Inches (1 m) of FR4 PCB

• Two-Level RX and TX Equalization

– RX→ 7, 15 dB

– TX→ 0, –1.3 dB

• Pin-Selectable SATA/SAS Signaling

• Programmable Squelch Threshold for Long

Channels

• Low Power in Active, Partial, and Slumber States

– 106 mW Typical (Active Mode at 6 Gbps)

– <11 mW (When Link in Partial and Slumber

State)

• Ultra-small Package for Optimal Placement

– 10-Pad 2.5-mm × 2.5-mm QFN

• High ESD-Transient Protection

– HBM: 9,000 V

– CDM: 1,500 V

– MM: 200 V

2 Applications

• Notebook and Desktop PCs

• Docking Stations

• Active Cable

• Servers

• Workstations

3 Description

The SN75LVCP600S is a single-channel SATA/SAS

signal conditioner supporting data rates up to 6 Gbps.

The device complies with SATA physical spec rev 3.0

and SAS electrical spec 2.0. The SN75LVCP600S

operates from a single 3.3-V supply and has 100-Ω

line termination with a self-biasing feature, making the

device suitable for AC coupling. The inputs

incorporate an out-of-band (OOB) detector, which

automatically squelches the output while maintaining

a stable common-mode voltage compliant to the

SATA/SAS link.

The SN75LVCP600S handles interconnect losses at

its input with selectable equalization settings that can

be programmed to the match loss in the channel. For

data rates of 3 Gbps and lower, the LVCP600S

equalizes signals for a span of up to 50 inches of

FR4 board material. For data rates of 6 Gbps, the

device compensates >40 inches (1 m) of FR4

material. Rx/Tx equalization level is controlled by the

setting of signal control pins EQ and DE.

The device is hot-plug capable (requires use of ACcoupling

capacitors at differential inputs and outputs),

preventing device damage during device hot-insertion

such as async signal plug/removal, unpowered

plug/removal, powered plug/removal, or surprise

plug/removal.