SN75DP159RGZT集成电路（IC）的视频处理规格书PDF中文资料

SN75DP159RGZT属于集成电路（IC）的视频处理。由德州仪器制造生产的SN75DP159RGZT视频处理一种集成电路 (IC) 半导体器件，设计用于在放大、增强、编码器和解码器（编解码器）、缓冲、校准、处理、信号调节、调制与解调、转换、传输、伽玛校正、切换、OSD、数字化和多路复用等应用中处理音频和/或视频信号。

1 Features

1• AC-coupled TMDS or DisplayPort Dual-Mode

Physical Layer Input to HDMI2.0b TMDS Physical

Layer Output Supporting up to 6 Gbps Data Rate,

Compatible with HDMI2.0b Electrical Parameters

• Supporting DisplayPort Dual-Mode Standard

Version 1.1

• Adaptive Receiver Equalizer and Programmable

Fixed Equalizer up to 16.5 dB

• High Speed Lane Control, Pre-emphasis and

Transmit Swing, and Slew Rate Control

• I2C or Pin Strap Programmable

• Supports Type-2 I2C-over-AUX to DDC Bridge

• Integrated TMDS Level Translator and CDR

• Active I2C[4] Buffer

• Input Swap on Main Lanes

• Low Power Consumption

• Low Power Consumption

– –435 mW Active at 6-Gbps and –10 mW at

Shutdown State

• Both Extended Commercial and Industrial

Temperature Device Options

• 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN

Package, Pin Compatible to the TPD158 Redriver

• 40-pin, 0.5 mm Pitch, 7 mm x 7 mm, VQFN

Package

2 Applications

• Notebook, Desktop, All-in-Ones, Tablet, Gaming

and Industrial PC

• Audio/Video Equipment

• Blu-ray™ DVD

• Gaming Systems

• HDMI Adaptor or Dongle

• Docking Station

3 Description

The SNx5DP159 device is a dual mode[1]

DisplayPort to transition-minimized differential signal

(TMDS) retimer supporting digital video interface

(DVI) 1.0 and high-definition multimedia interface

(HDMI) 1.4b and 2.0b output signals. The

SNx5DP159 device supports the dual mode standard

version 1.1 type 1 and type 2 through the DDC link or

AUX channel. The SNx5DP159 device supports data

rate up to 6-Gbps per data lane to support Ultra HD

(4K × 2K / 60-Hz) 8-bits per color high-resolution

video and HDTV with 16-bit color depth at 1080p

(1920 × 1080 / 60-Hz). The SNx5DP159 device can

automatically configure itself as a re-driver at data

rates <1 Gbps, or as a retimer at more than this data

rate. This feature can be turned off through I2C[4]

programming.

For signal integrity, the SNx5DP159 device

implements several features. The SNx5DP159

receiver supports both adaptive and fixed

equalization to clean up inter-symbol interference

(ISI) jitter or loss from the bandwidth-limited board

traces or cables. When working as a retimer, the

embedded clock data recovery (CDR) cleans up the

input high frequency and random jitter from video

source. The transmitter provides several features for

passing compliance and reducing system-level

design issues like de-emphasis, which compensates

for the attenuation when driving long cables or highloss

board traces. The SNx5DP159 device also

includes TMDS output amplitude adjust using an

external resistor on the Vsadj pin, source termination

selection, and output slew rate control. Device

operation and configuration can be programmed by

pin strapping or I2C[4].

The SNx5DP159 device implements several methods

for power management and active power reduction.