SN75C3238DW集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN75C3238DW属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN75C3238DW驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Auto-powerdown Plus

Operate With 3-V to 5.5-V VCC Supply

Always-Active Noninverting Receiver

Output (ROUT1B)

Support Operation From 250 kbit/s to

1 Mbit/s

Low Standby Current . . . 1 μA Typ

External Capacitors . . . 4 × 0.1 μF

Accept 5-V Logic Input With 3.3-V Supply

Inter-Operable With SN65C3243,

SN75C3243

RS-232 Bus-Pin ESD Protection Exceeds

±15-kV Using Human-Body Model (HBM)

Applications

− Battery-Powered Systems, PDAs,

Notebooks, Sub-Notebooks, Laptops,

Palmtop PCs, Hand-Held Equipment,

Modems, and Printers

description/ordering information

The ’C3238 devices consist of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV

ESD protection pin to pin (serial-port connection pins, including GND). The charge pump and four small external

capacitors allow operation from a single 3-V to 5.5-V supply. In addition, these devices include an always-active

noninverting output (ROUT1B), which allows applications using the ring indicator to transmit data while the

device is powered down. These devices operate at data signaling rates up to 1 Mbit/s and at an increased

slew-rate range of 24 V/μs to 150 V/μs.