SN75ALS199D集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN75ALS199D属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN75ALS199D驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Meets or Exceeds the Requirements of ITU

Recommendations V.10, V.11, X.26, and

X.27

Designed to Operate Up To 20 Mbaud

–7 V to 7 V Common-Mode Input Voltage

Range With 300-mV Sensitivity

3-State TTL-Compatible Outputs

High Input Impedance . . . 12 kW Min

Input Hysteresis . . . 120 mV Typ

Single 5-V Supply Operation

Low Supply Current Requirement

35 mA Max

Improved Speed and Power Consumption

Compared to MC3486

description

The SN75ALS199 is a monolithic, quadruple line receiver with 3-state outputs designed using advanced,

low-power, Schottky technology. This technology provides combined improvements in bar design, tooling

production, and wafer fabrication, providing significantly less power consumption and permitting much higher

data throughput than other designs. The device meets the specification of ITU Recommendations V.10, V.11,

X.26, and X.27.

The SN75ALS199 features 3-state outputs that permit direct connection to a bus-organized system with a

fail-safe design that ensures the ouptuts will always be high if the inputs are open. The device is optimized for

balanced multipoint bus transmission at rates up to 20 megabits per second. The input features high-input

impedance, input hysteresis for increased noise immunity, and an input sensitivity of ±300 mV over a

common-mode input voltage range of ±7 V. It also features an active-high enable function for each of two

receiver pairs. The SN75ALS199 is designed for optimum performance when used with the SN75ALS194

quadruple, differential line driver.

The SN75ALS199 is characterized for operation from 0°C to 70°C.