SN75ALS160集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN75ALS160属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN75ALS160驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Suitable for IEEE Standard 488-1978 (GPIB)

8-Channel Bidirectional Transceivers

High-Speed Advanced Low-Power Schottky

(ALS) Circuitry

Low Power Dissipation

. . . 46 mW Max Per Channel

Fast Propagation Times . . . 20 ns Max

High-Impedance pnp Inputs

Receiver Hysteresis . . . 650 mV Typ

Open-Collector Driver Output Option

No Loading of Bus When Device Is

Powered Down (VCC = 0)

Power-Up/Power-Down Protection

(Glitch Free)

description/ordering information

The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed,

advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended

transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The

transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk

enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is

low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The

driver outputs are designed to handle loads up to 48 mA of sink current.

An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits

a high impedance to the bus when VCC = 0. When combined with the SN75ALS161 or SN75ALS162 bus

management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.

The SN75ALS160 is characterized for operation from 0°C to 70°C.