QUADRUPLE PERIPHERAL DRIVER

Saturating Outputs With Low On-State Resistance High-Impedance Inputs Compatible With CMOS and TTL Levels Very Low Standby Power . . . 21 mW Max High-Voltage Outputs . . . 70 V Min No Power-Up or Power-Down Output Glitch No Latch-Up Within Recommended Operating Conditions Output-Clamp Dio

文件：186.77 Kbytes 页数：8 Pages

TI

德州仪器

丝印：SN75437ANE；Package：PDIP；QUADRUPLE PERIPHERAL DRIVER

Saturating Outputs With Low On-State Resistance High-Impedance Inputs Compatible With CMOS and TTL Levels Very Low Standby Power . . . 21 mW Max High-Voltage Outputs . . . 70 V Min No Power-Up or Power-Down Output Glitch No Latch-Up Within Recommended Operating Conditions Output-Clamp Dio

文件：186.77 Kbytes 页数：8 Pages

TI

德州仪器

丝印：SN75437ANE；Package：PDIP；QUADRUPLE PERIPHERAL DRIVER

Saturating Outputs With Low On-State Resistance High-Impedance Inputs Compatible With CMOS and TTL Levels Very Low Standby Power . . . 21 mW Max High-Voltage Outputs . . . 70 V Min No Power-Up or Power-Down Output Glitch No Latch-Up Within Recommended Operating Conditions Output-Clamp Dio

文件：186.77 Kbytes 页数：8 Pages

TI

德州仪器

丝印：SN75437ANE；Package：PDIP；QUADRUPLE PERIPHERAL DRIVER

Saturating Outputs With Low On-State Resistance High-Impedance Inputs Compatible With CMOS and TTL Levels Very Low Standby Power . . . 21 mW Max High-Voltage Outputs . . . 70 V Min No Power-Up or Power-Down Output Glitch No Latch-Up Within Recommended Operating Conditions Output-Clamp Dio

文件：186.77 Kbytes 页数：8 Pages

TI

德州仪器

QUADRUPLE PERIPHERAL DRIVERS

文件：80.74 Kbytes 页数：5 Pages

TI

德州仪器

QUADRUPLE PERIPHERAL DRIVER

文件：110.96 Kbytes 页数：7 Pages

TI

德州仪器

QUADRUPLE PERIPHERAL DRIVER

文件：110.96 Kbytes 页数：7 Pages

TI

德州仪器

QUADRUPLE PERIPHERAL DRIVERS

文件：80.74 Kbytes 页数：5 Pages

TI

德州仪器

QUADRUPLE PERIPHERAL DRIVER

文件：110.96 Kbytes 页数：7 Pages

TI

德州仪器

四路外设驱动器

The SN75437A quadruple peripheral driver is designed for use in systems requiring high current, high voltage, and high load power. This device features four inverting open-collector outputs with a common-enable (G) input that, when taken low, disables all four outputs. The envelope of 1-V characteri • Saturating Outputs With Low On-State Resistance• High-Impedance Inputs Compatible With CMOS and TTL Levels• Very Low Standby Power...21 mW Max• High-Voltage Outputs...70 V Min• No Power-Up or Power-Down Output Glitch• No Latch-Up Within Recommended Operating Conditions• Output-Clamp Diodes for Tra;

TI

德州仪器