SN75179BPSR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN75179BPSR属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN75179BPSR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• Meets or exceeds the requirements of

TIA/EIA-422-B, TIA/EIA-485-A, and ITU

Recommendation V.11

• Bus voltage range: –7V to 12V

• Positive- and negative-current limiting

• Driver output capability: 60mA Max

• Driver thermal-shutdown protection

• Receiver input impedance: 12kΩ Min

• Receiver input sensitivity: ±200mV

• Receiver input hysteresis: 50mV typical

• Operates from single 5V supply

• Low power requirements

2 Description

The SN75179B is a differential driver and

receiver pair designed for balanced transmission-line

applications and meets TIA/EIA-422-B, TIA/EIA-485-

A, and ITU Recommendation V.11. The device is

designed to improve the performance of full-duplex

data communications over long bus lines.

The SN75179B driver output provides limiting for both

positive and negative currents. The receiver features

high input impedance, input hysteresis for increased

noise immunity, and input sensitivity of ±200mV over

a common-mode input voltage range of –7V to 12V.

The driver provides thermal shutdown for protection

from line fault conditions. Thermal shutdown is

designed to occur at a junction temperature of

approximately 150°C. The SN75179B is designed to

drive current loads of up to 60mA maximum.

The SN75179B is characterized for operation from

0°C to 70°C.