SN74LXC8T245QPWRQ1集成电路（IC）的转换器电平移位器规格书PDF中文资料

SN74LXC8T245QPWRQ1属于集成电路（IC）的转换器电平移位器。由德州仪器制造生产的SN74LXC8T245QPWRQ1转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。

1 Features

• AEC-Q100 qualified for automotive applications

• Fully configurable dual-rail design allows each port

to operate from 1.1 V to 5.5 V

• Robust, glitch-free power supply sequencing

• Up to 420-Mbps support for 3.3 V to 5.0 V

• Schmitt-trigger inputs allow for slow or noisy inputs

• I/Os with integrated dynamic pull-down resistors

help reduce external component count

• Control inputs with integrated static pull-down

resistors allow for floating control inputs

• High drive strength (up to 32 mA at 5 V)

• Low power consumption:

– 4-μA maximum (25°C)

– 12-μA maximum (–40°C to 125°C)

• VCC isolation and VCC disconnect (Ioff-float) feature:

– If either VCC supply is < 100 mV or

disconnected, all I/Os get pulled-down and then

become high-impedance

• Ioff supports partial-power-down mode operation

• Compatible with LVC family level shifters

• Control logic (DIR and OE) are referenced to VCCA

• Operating temperature from –40°C to +125°C

• Latch-up performance exceeds 100 mA per JESD

78, Class II

• ESD protection exceeds JESD 22

– 4000-V Human-Body Model

– 1000-V Charged-Device Model

2 Applications

• Eliminate slow or noisy input signals

• Driving indicator LEDs or buzzers

• Debouncing a mechanical switch

• Infotainment head unit

• ADAS fusion

3 Description

The SN74LXC8T245-Q1 is an 8-bit, dual-supply

noninverting bidirectional voltage level translation

device. Ax pins and control pins (DIR and OE) are

referenced to VCCA logic levels, and Bx pins are

referenced to VCCB logic levels. The A port is able to

accept I/O voltages ranging from 1.1 V to 5.5 V, while

the B port can accept I/O voltages from 1.1 V to 5.5

V. A high on DIR allows data transmission from A to

B and a low on DIR allows data transmission from B

to A when OE is set to low. When OE is set to high,

both Ax and Bx pins are in the high-impedance state.

See Device Functional Modes for a summary of the

operation of the control logic.