SN74LVC841ADGVR集成电路（IC）的锁存器规格书PDF中文资料

SN74LVC841ADGVR属于集成电路（IC）的锁存器。由德州仪器制造生产的SN74LVC841ADGVR锁存器锁存器是类似于触发器的基本数字存储设备，但是不同之处在于，在锁存使能（或类似命名）信号处于有效逻辑状态的任何时间，保持的逻辑状态都可以改变。“透明”锁存器还允许设备输出在锁存使能信号有效时反映输入的当前状态，而相反的是，状态仅在保持状态已固定时改变。

FEATURES

· Operates From 1.65 V to 3.6 V

· Inputs Accept Voltages to 5.5 V

· Max tpd of 6.7 ns at 3.3 V

· Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

· Typical VOHV (Output VOH Undershoot)

>2 V at VCC = 3.3 V, TA = 25°C

· Ioff Supports Partial-Power-Down Mode

Operation

· Supports Mixed-Mode Signal Operation on

All Ports (5-V Input/Output Voltage With

3.3-V VCC)

· Latch-Up Performance Exceeds 250 mA Per

JESD 17

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This 10-bit bus-interface D-type latch is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC841A is designed specifically for driving highly capacitive or relatively low-impedance loads. It is

particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The ten latches are transparent D-type latches. The device has noninverting data (D) inputs and provides true

data at its outputs.

A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high or

low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the

bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines

without interface or pullup components.