SNx4LVC74A Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 5.2ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

文件：2.82291 Mbytes 页数：40 Pages

TI

德州仪器

SN74LVC74A-Q1 Automotive Dual Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset

1 Features • Qualified for automotive applications • ESD protection exceeds 2000V per MIL-STD-883, Method 3015 • Operates from 2V to 3.6V • Inputs accept voltages to 5.5V • Max tpd of 5.2ns at 3.3V • Typical VOLP (output ground bounce)

文件：1.42539 Mbytes 页数：23 Pages

TI

德州仪器

SN74LVC74A-Q1 Automotive Dual Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset

1 Features • Qualified for automotive applications • ESD protection exceeds 2000V per MIL-STD-883, Method 3015 • Operates from 2V to 3.6V • Inputs accept voltages to 5.5V • Max tpd of 5.2ns at 3.3V • Typical VOLP (output ground bounce)

文件：1.63966 Mbytes 页数：26 Pages

TI

德州仪器

SNx4LVC74A Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 5.2ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

文件：3.69997 Mbytes 页数：46 Pages

TI

德州仪器

DUAL POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET

文件：550.11 Kbytes 页数：13 Pages

TI

德州仪器

具有清零和预置端的增强型产品双路正边沿触发式 D 型触发器

The SN74LVC74A dual positive-edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operation. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input • Controlled Baseline \n• Extended Temperature Performance of -40°C to 125°C and -55°C to 125°C\n• Enhanced Product-Change Notification\n• Operates From 2 V to 3.6 V\n• Max tpd of 5.2 ns at 3.3 V\n• Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C\n \nComponent qualification in a;

TI

德州仪器