OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

1FEATURES · Qualified for Automotive Applications · ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) · Operates From 2 V to 3.6 V · Inputs Accept Voltages to 5.5 V · Max tpd of 5.3 ns at 3.3 V · Typical VOLP (Output Ground Bo

文件：658.49 Kbytes 页数：16 Pages

TI

德州仪器

SNx4LVC540A Octal Buffers/Drivers with 3-State Outputs

1 Features 1• Operate From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 5.3 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at V CC = 3.3 V, TA = 25°C • Support Mixed-Mode Signal Operation on

文件：959.9 Kbytes 页数：29 Pages

TI

德州仪器

SNx4LVC540A Octal Buffers/Drivers with 3-State Outputs

1 Features 1• Operate From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 5.3 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at V CC = 3.3 V, TA = 25°C • Support Mixed-Mode Signal Operation on

文件：960.25 Kbytes 页数：29 Pages

TI

德州仪器

Octal Buffers/Drivers with 3-State Outputs

文件：1.22114 Mbytes 页数：26 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：409.37 Kbytes 页数：9 Pages

TI

德州仪器

具有三态输出的增强型产品 8 通道、2V 至 3.6V 反相器

The SN74LVC540A-EP octal buffer/driver is designed for 2.7-V to 3.6-V VCC operation.\n\n This device is ideal for driving bus lines or buffer-memory address registers. This device features inputs and outputs on opposite sides of the package that facilitate printed circuit board layout.\n\n The 3-sta • Controlled Baseline \n• Extended Temperature Performance of –40°C to 125°C\n• Enhanced Product-Change Notification\n• Operates From 2 V to 3.6 V\n• Max tpd of 5.3 ns at 3.3 V\n• Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C\n• Ioff Supports Partial-Power-Down Mode Operation\n;

TI

德州仪器