SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

DUAL TWO-INPUT POSITIVE-OR GATE

1FEATURES 2• Qualified for Automotive Applications • AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range – Device HBM ESD Classification Level H2 – Device CDM ESD Classification Level C3B • Inputs Accept Voltages

文件：849.54 Kbytes 页数：13 Pages

TI

德州仪器

DUAL 2 INPUT POSITIVE-OR GATE

文件：319.81 Kbytes 页数：12 Pages

TI

德州仪器

2 通道、2 输入、1.65V 至 5.5V 或门

这个双路上输入正或门被设计用于 1.65V 至 5.5V 集流器电源电压运行。 SN74LVC2G32-Q1 在正逻辑中执行布尔函数 。 NanoFree 封装技术是IC 封装概念的一项重大突破，它将硅晶片用作封装。 该器件完全符合使用关闭状态电流的部分断电应用的规范要求。 关闭状态电流电路禁用输出，从而可防止其断电时破坏性电流从该器件回流。 • 符合汽车应用要求\n• 器件温度 1 级：-40°C 至 125°C 的环境运行温度范围\n• 器件充电器件模型 (CDM) ESD 分类等级 C3B\n• 输入接受的电压达到 5.5V\n• 低功耗，最大电源电流 10μA\n• 在VCC=3.3 V，TA=25°C 时，典型电压输出低峰值（输出地弹反射）CC=3.3V，TA=25°C 时，典型电压输出高谷值 (VOH下冲)>2V \n• I关闭状态电流支持部分断电模式运行;

TI

德州仪器

SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

丝印：C32；Package：SSOP；SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

丝印：C32；Package：SSOP；SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器

丝印：C32；Package：SSOP；SN74LVC2G32 Dual 2-Input Positive-OR Gate

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Maximum tpd of 3.8 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：719.47 Kbytes 页数：26 Pages

TI

德州仪器