SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

DUAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：380.33 Kbytes 页数：14 Pages

TI

德州仪器

Dual Buffer and Driver With 3-State Outputs

文件：1.01785 Mbytes 页数：24 Pages

TI

德州仪器

具有三态输出的 2 通道、1.65V 至 5.5V 缓冲器

此双路缓冲器和线路驱动器适用于 1.65V 至 5.5V VCC 运行环境。\n\nSN74LVC2G241 器件设计用于提高三态存储器地址驱动器、时钟驱动器以及总线导向接收器和发射器的性能和密度。\n\nNanoFree 封装技术是 IC 封装概念的一项重大突破，它将硅晶片用作封装。\n\nSN74LVC2G241 器件被组织为两个具有独立输出使能（1OE，2OE）输入的 1 位线路驱动器。当 1OE 为低电平，2OE 为高电平时，该器件将来自 A 输入的数据传递到 Y 输出。当 1OE 为高电平，2OE 为低电平时，输出处于高阻抗状态。\n\n为了确保在上电或断电期间处于高阻抗状态，应通过 • 采用德州仪器 (TI) 的 NanoFree™封装\n• 支持 5V VCC 运行\n• 输入电压高达 5.5V\n• 电压为 3.3V 时，tpd 最大值为 4.1ns\n• 低功耗，ICC 最大值为 10µA \n• 电压为 3.3V 时，输出驱动为 ±24mA\n• VCC = 3.3 V，TA = 25°C 时，VOLP（输出地弹反射）典型值小于 0.8V\n• VCC = 3.3V，TA = 25°C 时，VOHV（输出 VOH 下冲）典型值大于 2V\n• Ioff 支持带电插入、局部关断模式和后驱动保护\n• 可用于下行转换器，将最高 5.5V 的输入电压下行转换至 VCC ;

TI

德州仪器

SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：727.69 Kbytes 页数：25 Pages

TI

德州仪器

丝印：C41J；Package：VSSOP；SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs

1 Features 1• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Low Power Consumption, 10-μA Maximum ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：725.75 Kbytes 页数：25 Pages

TI

德州仪器