Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器

DUAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：308.29 Kbytes 页数：11 Pages

TI

德州仪器

Dual Buffer Driver With 3-State Outputs

文件：850.87 Kbytes 页数：17 Pages

TI

德州仪器

具有三态输出的 2 通道、1.65V 至 5.5V 反相器

This dual buffer driver is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC2G240 device is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. NanoFree™ package technology is a major breakt • Available in the Texas Instruments NanoFree Package\n• Inputs Accept Voltages to 5.5 V\n• Low Power Consumption, 10-µA Max ICC \n• Typical VOLP (Output Ground Bounce) CC = 3.3 V, TA = 25°C\n• Ioff Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection\n• Latch-Up Performance ;

TI

德州仪器

丝印：2WO5；Package：SSOP；Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器

丝印：2WO5；Package：SSOP；Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器

丝印：C40J；Package：VSSOP；Dual Buffer Driver With 3-State Outputs

1FEATURES 2• Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：649.24 Kbytes 页数：20 Pages

TI

德州仪器

丝印：C40Q；Package：VSSOP；Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器

丝印：C40Q；Package：VSSOP；Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器

丝印：CK7；Package：DSBGA；Dual Buffer Driver With 3-State Outputs

FEATURES • Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4.6 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce)

文件：653.43 Kbytes 页数：21 Pages

TI

德州仪器