SN74LVC125ANSR集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

SN74LVC125ANSR属于集成电路（IC）的缓冲器驱动器接收器收发器。由德州仪器制造生产的SN74LVC125ANSR缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

1 Features

• 3-State outputs

• Separate OE for all 4 buffers

• Operates from 1.65V to 3.6V

• Specified from –40°C to 85°C

and –40°C to 125°C

• Inputs accept voltages to 5.5V

• Max tpd of 4.8ns at 3.3V

• Typical VOLP (output ground bounce)

< 0.8V at VCC = 3.3V, TA = 25°C

• Typical VOHV (output VOH undershoot)

> 2V at VCC = 3.3V, TA = 25°C

• Latch-up performance exceeds 250mA

per JESD 17

2 Applications

• Cable Modem Termination Systems

• IP Phones: Wired and Wireless

• Optical Modules

• Optical Networking:

– EPON or Video Over Fiber

• Point-to-Point Microwave Backhaul

• Power: Telecom DC/DC Modules:

– Analog or Digital

• Private Branch Exchanges (PBX)

• TETRA Base Stations

• Telecom Base Band Units

• Telecom Shelters:

– Filter Units

– Power Distribution Units (PDU)

– Power Monitoring Units (PMU)

– Wireless Battery Monitoring

– Remote Electrical Tilt Units (RET)

– Remote Radio Units (RRU)

– Tower Mounted Amplifiers (TMA)

• Vector Signal Analyzers and Generators

• Video Conferencing: IP-Based HD

• WiMAX and Wireless Infrastructure Equipment

• Wireless Communications Testers

• xDSL Modems and DSLAM

3 Description

This quadruple bus buffer gate is designed for 1.65V

to 3.6V VCC operation.

The SN74LVC125A device features independent line

drivers with 3-state outputs. Each output is disabled

when the associated output-enable (OE) input is high.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through

a pullup resistor; the minimum value of the resistor

is determined by the current-sinking capability of the

driver.

Inputs can be driven from either 3.3V or 5V devices.

This feature allows the use of this device as a

translator in a mixed 3.3V/5V system environment.