SN74LV8T374 Translating Octal D-Type Flip-Flops with Clear

1 Features • Wide operating range of 1.65V to 5.5V • 5.5V tolerant input pins • Single-supply voltage translator (refer to LVxT Enhanced Input Voltage): – Up translation: • 1.2V to 1.8V • 1.5V to 2.5V • 1.8V to 3.3V • 3.3V to 5.0V – Down translation: • 5.0V, 3.3V, 2.5V to 1.8V • 5.0V,

文件：1.99123 Mbytes 页数：41 Pages

TI

德州仪器

丝印：8T374Q；Package：VSSOP(DGS)；SN74LV8T374-Q1 Automotive Translating Octal D-Type Flip-Flops with Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.65V to 5.5V • 5.5V tolerant inpu

文件：1.82115 Mbytes 页数：39 Pages

TI

德州仪器

SN74LV8T374-Q1 Automotive Translating Octal D-Type Flip-Flops with Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.65V to 5.5V • 5.5V tolerant inpu

文件：1.82115 Mbytes 页数：39 Pages

TI

德州仪器

SN74LV8T374 Translating Octal D-Type Flip-Flops with Clear

1 Features • Wide operating range of 1.65V to 5.5V • 5.5V tolerant input pins • Single-supply voltage translator (refer to LVxT Enhanced Input Voltage): – Up translation: • 1.2V to 1.8V • 1.5V to 2.5V • 1.8V to 3.3V • 3.3V to 5.0V – Down translation: • 5.0V, 3.3V, 2.5V to 1.8V • 5.0V,

文件：1.99123 Mbytes 页数：41 Pages

TI

德州仪器

具有逻辑电平移位器的增强型产品八通道 D 型触发器

这些 8 位触发器具有专门设计用于驱动高电容或相对低阻抗负载的三态输出。它们尤其适用于实现缓冲寄存器、I/O 端口、双向总线驱动器和工作寄存器。 1.65V 至 5.5V 的宽工作电压范围\n \n5.5V 容限输入引脚\n \n单电源电压转换器（参阅 LVxT 增强输入电压）： \n \n升压转换： \n \n1.2V 至 1.8V\n \n1.5V 至 2.5V\n \n1.8V 至 3.3V\n \n3.3V 至 5.0V\n \n\n \n 降压转换： \n \n5.0V、3.3V、2.5V 至 1.8V\n \n5.0V、3.3V 至 2.5V\n \n5.0V 至 3.3V\n \n\n \n\n \n速率高达 150Mbps，具有 5V 或 3.3V VCC\n \n支持标准功能引脚排列\n \n闩锁性能超过 250mA，;

TI

德州仪器

具有三态输出和集成电平转换功能的汽车级八路 D 型触发器

The SN74LV8T374-Q1 contains eight D-type flip-flops. All channels share a rising edge triggered clock (CLK) input and active low output enable (OE) input. This device has a flow-through pinout which allows for easier bus routing.\n\nThe input is designed with a reduced threshold circuit to support u • AEC-Q100 qualified for automotive applications: \n• Device HBM ESD classification level 2\n• Available in wettable flank QFN package\n• 5.5V tolerant input pins\n• Up translation: \n• 1.5V to 2.5V\n• 3.3V to 5.0V\n• Down translation: \n• 5.0V, 3.3V to 2.5V\n• Up to 150Mbps with 5V or 3.3V VCC\n•;

TI

德州仪器