丝印：8T240Q；Package：VSSOP(DGS)；SN74LV8T240-Q1 Automotive Octal Inverting Buffers/Drivers with 3-State Outputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.65V to 5.5V • 5.5V tolerant inpu

文件：1.7807 Mbytes 页数：33 Pages

TI

德州仪器

SN74LV8T240-Q1 Automotive Octal Inverting Buffers/Drivers with 3-State Outputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.65V to 5.5V • 5.5V tolerant inpu

文件：1.7807 Mbytes 页数：33 Pages

TI

德州仪器

SN74LV8T240 Octal Inverting Buffers/Drivers with 3-State Outputs

1 Features • Wide operating range of 1.65V to 5.5V • 5.5V tolerant input pins • Single-supply voltage translator (refer to LVxT Enhanced Input Voltage): – Up translation: • 1.2V to 1.8V • 1.5V to 2.5V • 1.8V to 3.3V • 3.3V to 5.0V – Down translation: • 5.0V, 3.3V, 2.5V to 1.8V • 5.0V,

文件：1.94901 Mbytes 页数：35 Pages

TI

德州仪器

具有三态输出的 8 位反相固定方向电平转换器（增强型产品）

SN74LV8T240-EP 器件包含八个具有三态输出的独立反相线路驱动器。每个通道以正逻辑执行布尔函数 Y = A。这些通道四个一组，每个组都由一个 OE 引脚控制。通过对相关联的 OE 引脚施加高电平，可以将输出置于高阻态。 1.65V 至 5.5V 的宽工作电压范围\n \n5.5V 容限输入引脚\n \n单电源电压转换器（参阅 LVxT 增强输入电压）： \n \n升压转换： \n \n1.2V 至 1.8V\n \n1.5V 至 2.5V\n \n1.8V 至 3.3V\n \n3.3V 至 5.0V\n \n\n \n 降压转换： \n \n5.0V、3.3V、2.5V 至 1.8V\n \n5.0V、3.3V 至 2.5V\n \n5.0V 至 3.3V\n \n\n \n\n \n速率高达 150Mbps，具有 5V 或 3.3V VCC\n \n支持标准功能引脚排列\n \n闩锁性能超过 250mA，;

TI

德州仪器

具有三态输出和电平转换输入的汽车级八路反相缓冲器/驱动器

The SN74LV8T240-Q1 device contains eight independent inverting line drivers with 3-state outputs. Each channel performs the Boolean function Y = A in positive logic. The channels are grouped in sets of four, with one OE pin controlling each set. The outputs can be put into a hi-Z state by applying a • AEC-Q100 qualified for automotive applications: \n• Device HBM ESD classification level 2\n• Available in wettable flank QFN package\n• 5.5V tolerant input pins\n• Up translation: \n• 1.5V to 2.5V\n• 3.3V to 5.0V\n• Down translation: \n• 5.0V, 3.3V to 2.5V\n• Up to 150Mbps with 5V or 3.3V VCC\n•;

TI

德州仪器