SN74LV8151PWR.A中文资料德州仪器数据手册PDF规格书

2-V to 5.5-V VCC Operation

Max tpd of 15 ns at 5 V

Schmitt-Trigger Inputs Allow for Slow Input

Rise/Fall Time

Polarity Control for Y Outputs Selects True

or Complementary Logic

Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

Typical VOHV (Output VOH Undershoot)

>2.3 V at VCC = 3.3 V, TA = 25°C

Ioff Supports Partial-Power-Down Mode

Operation

Supports Mixed-Mode Voltage Operation on

All Ports

Latch-Up Performance Exceeds 250 mA Per

JESD 17

ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

− 1000-V Charged-Device Model (C101)

description/ordering information

The SN74LV8151 is a 10-bit universal Schmitt-trigger buffer with 3-state outputs, designed for 2-V to 5.5-V VCC

operation. The logic control (T/C) pin allows the user to configure Y1 to Y8 as noninverting or inverting outputs.

When T/C is high, the Y outputs are noninverted (true logic ), and when T/C is low, the Y outputs are inverted

(complementary logic).

When output-enable (OE) input is low, the device passes data from Dn to Yn. When OE is high, the Y outputs

are in the high-impedance state. The path A to P is a simple Schmitt-trigger buffer, and the path B to N is a simple

Schmitt-trigger inverter.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.