SN74HCT623数据手册集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF

描述 Description

These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing.
The ’HCT623 devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic levels at the output-enable (OEAB and OEBA\\) inputs.
The output-enable inputs disable the device so that the buses are effectively isolated. The dual-enable configuration gives the transceivers the capability to store data by simultaneously enabling OEAB and OEBA\\. Each output reinforces its input in this transceiver configuration. When both OEAB and OEBA\\ are enabled and all other data sources to the two sets of bus lines are in the high-impedance state, both sets of bus lines (16 total) remain at their last states. The 8-bit codes appearing on the two sets of buses are identical.
To ensure the high-impedance state during power up or power down, OEBA\\ should be tied to VCC through a pullup resistor and OEAB should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.

特性 Features

• Operating Voltage Range of 4.5 V to 5.5 V
• Low Power Consumption, 80-µA Max ICC
• Typical tpd = 11 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Inputs Are TTL-Voltage Compatible
• Lock Bus-Latch Capability
• True Logic
• High-Current 3-State Outputs Can Drive Up To 15 LSTTL Loads