SN74HCS72QPWRQ1.A中文资料德州仪器数据手册PDF规格书

1 Features

1• AEC-Q100 Qualified for automotive applications:

– Device temperature grade 1: –40°C to +125°C,

TA

– Device HBM ESD Classification Level 2

– Device CDM ESD Classifcation Level C6

• Wide operating voltage range: 2 V to 6 V

• Schmitt-trigger inputs allow for slow or noisy input

signals

• Low power consumption

– Typical ICC of 100 nA

– Typical input leakage current of ±100 nA

• ±7.8-mA output drive at 5 V

2 Applications

• Convert a momentary switch to a toggle switch

• Input slow edge-rate signals

• Operate in noisy environments

• Enable CAN Controller Power with wake-up

pattern

3 Description

This device contains two independent D-type

negative-edge-triggered flip-flops. All inputs include

Schmitt-triggers, allowing for slow or noisy input

signals. A low level at the preset (PRE) input sets the

output high. A low level at the clear (CLR) input

resets the output low. Preset and clear functions are

asynchronous and not dependent on the levels of the

other inputs. When PRE and CLR are inactive (high),

data at the data (D) input meeting the setup time

requirements is transferred to the outputs (Q, Q) on

the negative-going edge of the clock (CLK) pulse.

Following the hold-time interval, data at the data (D)

input can be changed without affecting the levels at

the outputs (Q, Q).