SN74HCS365 Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

1 Features • Wide operating voltage range: 2 V to 6 V • Schmitt-trigger inputs allow for slow or noisy input signals • Low power consumption – Typical ICC of 100 nA – Typical input leakage current of ±100 nA • ±7.8-mA output drive at 6 V • Extended ambient temperature range: –40°C to +125

文件：1.35865 Mbytes 页数：28 Pages

TI

德州仪器

SN74HCS365 Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

1 Features • Wide operating voltage range: 2 V to 6 V • Schmitt-trigger inputs allow for slow or noisy input signals • Low power consumption – Typical ICC of 100 nA – Typical input leakage current of ±100 nA • ±7.8-mA output drive at 6 V • Extended ambient temperature range: –40°C to +125

文件：1.33033 Mbytes 页数：28 Pages

TI

德州仪器

SN74HCS365-Q1 Automotive Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

文件：1.22667 Mbytes 页数：24 Pages

TI

德州仪器

SN74HCS365-Q1 Automotive Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

文件：1.19133 Mbytes 页数：23 Pages

TI

德州仪器

SN74HCS365-Q1 Automotive Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

文件：2.44422 Mbytes 页数：31 Pages

TI

德州仪器

具有三态输出的汽车类六路缓冲器和线路驱动器

The contains six independent buffers with Schmitt-trigger inputs and 3-state outputs. All channels are placed into the high-impedance mode when either of the output enable (OE) pins are set to the high state. • AEC-Q100 Qualified for automotive applications: \n• Device HBM ESD Classification Level 2\n• Wide operating voltage range: 2 V to 6 V\n• Low power consumption \n• Typical input leakage current of ±100 nA\n• 7.8-mA output drive at 6 V;

TI

德州仪器

SN74HCS365-Q1 Automotive Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

文件：1.22667 Mbytes 页数：24 Pages

TI

德州仪器

SN74HCS365-Q1 Automotive Hex Buffers and Line Drivers with 3-State Outputs and Schmitt-Trigger Inputs

文件：2.44422 Mbytes 页数：31 Pages

TI

德州仪器