SN74GTL2010PW集成电路（IC）的转换器电平移位器规格书PDF中文资料

SN74GTL2010PW属于集成电路（IC）的转换器电平移位器。由美国德州仪器公司制造生产的SN74GTL2010PW转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。

FEATURES

· Provides Bidirectional Voltage Translation

With No Direction Control Required

· Allows Voltage Level Translation From 1 V up

to 5 V

· Provides Direct Interface With GTL, GTL+,

LVTTL/TTL, and 5-V CMOS Levels

· Low On-State Resistance Between Input and

Output Pins (Sn/Dn)

· Supports Hot Insertion

· No Power Supply Required – Will Not Latch

Up

· 5-V-Tolerant Inputs

· Low Standby Current

· Flow-Through Pinout for Ease of Printed

Circuit Board Trace Routing

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-4)

– 1000-V Charged-Device Model (C101)

APPLICATIONS

· Bidirectional or Unidirectional Applications

Requiring Voltage-Level Translation From

Any Voltage (1 V to 5 V) to Any Voltage (1 V

to 5 V)

· Low Voltage Processor I2C Port Translation

to 3.3-V and/or 5-V I2C Bus Signal Levels

· GTL/GTL+ Translation to LVTTL/TTL Signal

Levels

DESCRIPTION/ORDERING INFORMATION

The GTL2010 provides ten NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference

transistor (SREF and DREF). The low ON-state resistance of the switch allows connections to be made with

minimal propagation delay. With no direction control pin required, the device allows bidirectional voltage

translations any voltage (1 V to 5 V) to any voltage (1 V to 5 V).

When the Sn or Dn port is LOW, the clamp is in the ON state and a low-resistance connection exists between

the Sn and Dn ports. Assuming the higher voltage is on the Dn port, when the Dn port is HIGH, the voltage on

the Sn port is limited to the voltage set by the reference transistor (SREF). When the Sn port is HIGH, the Dn port

is pulled to VCC by the pullup resistors.