SN74F574DW集成电路（IC）的触发器规格书PDF中文资料

SN74F574DW属于集成电路（IC）的触发器。由美国德州仪器公司制造生产的SN74F574DW触发器触发器是能够存储单个逻辑状态或信息“位”的基本数字存储器件。这些器件至少有两个输入；一个或多个用于传递要存储的数据，另一个用于指示存储该数据的时间点。不同的触发器类型，例如 D（延迟）、SR（置位复位）和 JK，对提供给其输入的信号有不同的响应，可用于实现不同的逻辑功能。这些器件与锁存器的不同之处在于它们是边缘敏感器件，其保持的逻辑状态仅在接收到有效时钟信号时才会改变。

Eight D-Type Flip-Flops in a Single

Package

3-State Bus-Driving True Outputs

Full Parallel Access for Loading

Buffered Control Inputs

Package Options Include Plastic

Small-Outline Packages and Standard

Plastic 300-mil DIPs

description

This 8-bit flip-flop features 3-state outputs

designed specifically for driving highly capacitive

or relatively low-impedance loads. It is particularly

suitable for implementing buffer registers, I/O

ports, bidirectional bus drivers, and working

registers.

The eight flip-flops of the SN74F574 are edge-triggered D-type flip-flops. On the positive transition of the clock

(CLK) input, the Q outputs will be set to the logic levels that were set up at the data (D) inputs.

A buffered output enable (OE) input can be used to place the eight outputs in either a normal logic state (high

or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive

the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus

lines without need for interface or pullup components.

The output enable (OE) does not affect the internal operations of the flip-flops. Old data can be retained or new

data can be entered while the outputs are in the high-impedance state.

The SN74F574 is characterized for operation from 0°C to 70°C.