SN74F543DBR集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

SN74F543DBR属于集成电路（IC）的缓冲器驱动器接收器收发器。由美国德州仪器公司制造生产的SN74F543DBR缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

• 3-State True Outputs

• Back-to-Back Registers for Storage

• Package Options Include Plastic

Small-Outline and Shrink Small-Outline

Packages and Standard Plastic 300-mil

DIPs

description

The SN74F543 octal transceiver contains two

sets of D-type latches for temporary storage of

data flowing in either direction. Separate

latch-enable (LEAB or LEBA) and output enable

(OEAB or OEBA) inputs are provided for each

register to permit independent control in either

direction of data flow. The A outputs are

characterized to sink 24 mA while the B outputs

are characterized to sink 64 mA.

The A-to-B enable (CEAB) input must be low in order to enter data from A or to output data from B. Having CEAB

low and LEAB low makes the A-to-B latches transparent; a subsequent low-to-high transition of LEAB puts the

A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the

data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA,

and OEBA inputs.

The SN74F543 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count

and functionality of standard small-outline packages in less than half the printed-circuit-board area.

The SN74F543 is characterized for operation from 0°C to 70°C.