SN74CBTLV3384DW.B中文资料德州仪器数据手册PDF规格书

5-Ω Switch Connection Between Two Ports

Rail-to-Rail Switching on Data I/O Ports

Ioff Supports Partial-Power-Down Mode

Operation

Latch-Up Performance Exceeds 250 mA Per

JESD 17

ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

description/ordering information

The SN74CBTLV3384 provides ten bits of

high-speed bus switching. The low on-state

resistance of the switch allows connections to be

made with minimal propagation delay.

The device is organized as dual 5-bit bus switches

with separate output-enable (OE) inputs. It can be

used as two 5-bit bus switches or one 10-bit bus switch. When OE is low, the associated 5-bit bus switch is on,

and A port is connected to B port. When OE is high, the switch is open, and the high-impedance state exists

between the two ports.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that

damaging current will not backflow through the device when it is powered down. The device has isolation during

power off.

To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.