SN74CBT6800ADGVR集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

SN74CBT6800ADGVR属于集成电路（IC）的信号开关多路复用器解码器。由美国德州仪器公司制造生产的SN74CBT6800ADGVR信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

5-Ω Switch Connection Between Two Ports

TTL-Compatible Input Levels

Outputs Are Precharged by Bias Voltage to

Minimize Signal Distortion During Live

Insertion

description

The SN74CBT6800A provides ten bits of

high-speed TTL-compatible bus switching. The

low on-state resistance of the switch allows

bidirectional connections to be made while adding

near-zero propagation delay. The device also

precharges the B port to a user-selectable

bias voltage (BIASV) to minimize live-insertion

noise.

The SN74CBT6800A is organized as one 10-bit switch with a single enable (ON) input. When ON is low, the

switch is on, and port A is connected to port B. When ON is high, the switch between port A and port B is open.

When ON is high or VCC is 0 V, B port is precharged to BIASV through the equivalent of a 10-kΩ resistor.