SN74CB3T3125PW集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

SN74CB3T3125PW属于集成电路（IC）的信号开关多路复用器解码器。由德州仪器制造生产的SN74CB3T3125PW信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

1 Features

1• Output Voltage Translation Tracks VCC

• Supports Mixed-Mode Signal Operation On All

Data I/O Ports

– 5-V Input Down to 3.3-V Output-Level Shift

With 3.3-V VCC

– 5-V/3.3-V Input Down to 2.5-V Output-Level

Shift With 2.5-V VCC

• 5-V-Tolerant I/Os With Device Powered Up or

Powered Down

• Bidirectional Data Flow, With Near-Zero

Propagation Delay

• Low ON-State Resistance (ron) Characteristics

(ron = 5 Ω Typical)

• Low Input/Output Capacitance Minimizes Loading

(Cio(OFF) = 4.5 pF Typical)

• Data and Control Inputs Provide Undershoot

Clamp Diodes

• Low Power Consumption (ICC = 20 μA Max)

• VCC Operating Range From 2.3 V to 3.6 V

• Data I/Os Support 0- to 5-V Signaling Levels (0.8

V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V)

• Control Inputs Can Be Driven by TTL or 5-V/3.3-V

CMOS Outputs

• Ioff Supports Partial-Power-Down Mode Operation

• Latch-Up Performance Exceeds 250 mA Per

JESD 17

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

2 Applications

• Supports Digital Applications: Level Translation,

USB Interface, Bus Isolation

• Ideal for Low-Power Portable Equipment

3 Description

The SN74CB3T3125 is a high-speed TTL-compatible

FET bus switch with low ON-state resistance (ron),

allowing for minimal propagation delay. The device

fully supports mixed-mode signal operation on all

data I/O ports by providing voltage translation that

tracks VCC. The SN74CB3T3125 supports systems

using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS

switching standards, as well as user-defined

switching levels (see Typical DC Voltage-Translation

Characteristics).

The SN74CB3T3125 is organized as four 1-bit bus

switches with separate output-enable (1OE, 2OE,

3OE, 4OE) inputs. It can be used as four 1-bit bus

switches or as one 4-bit bus switch. When OE is low,

the associated 1-bit bus switch is ON, and the A port

is connected to the B port, allowing bidirectional data

flow between ports. When OE is high, the associated

1-bit bus switch is OFF, and the high-impedance

state exists between the A and B ports.

This device is fully specified for partial-power-down

applications using Ioff. The Ioff feature ensures that

damaging current will not backflow through the device

when it is powered down. The device has isolation

during power off.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through a

pullup resistor; the minimum value of the resistor is

determined by the current-sinking capability of the

driver.