SN74CB3Q3253PWR集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

SN74CB3Q3253PWR属于集成电路（IC）的信号开关多路复用器解码器。由德州仪器制造生产的SN74CB3Q3253PWR信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

1 Features

1• High-Bandwidth Data Path (Up to 500 MHz) (1)

• 5-V Tolerant I/Os With Device Powered Up or

Powered Down

• Low and Flat ON-State Resistance (ron)

Characteristics Over Operating Range

(ron = 4 Ω Typical)

• Rail-to-Rail Switching on Data I/O Ports

– 0- to 5-V Switching With 3.3-V VCC

– 0- to 3.3-V Switching With 2.5-V VCC

• Bidirectional Data Flow With Near-Zero

Propagation Delay

• Low Input/Output Capacitance Minimizes Loading

and Signal Distortion (Cio(OFF) = 3.5 pF Typical)

• Fast Switching Frequency (fOE = 20 MHz Max)

• Data and Control Inputs Provide Undershoot

Clamp Diodes

• Low Power Consumption (ICC = 0.6 mA Typical)

• VCC Operating Range From 2.3 V to 3.6 V

• Data I/Os Support 0- to 5-V Signal Levels (0.8-V,

1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)

• Control Inputs Can be Driven by TTL or 5-V and

3.3-V CMOS Outputs

• Ioff Supports Partial-Power-Down Mode Operation

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model (A114-B, Class II)

– 1000-V Charged-Device Model (C101)

• Supports Both Digital and Analog Applications:

USB Interface, Differential Signal Interface Bus

Isolation, Low-Distortion Signal Gating

(1) For additional information regarding the performance

characteristics of the CB3Q family, refer to the TI application

report CBT-C, CB3T, and CB3Q Signal-Switch Families,

(SCDA008).

2 Applications

• Video Broadcasting: IP-Based Multi-Format

Transcoder

• Video Communications System

3 Description

The SN74CB3Q3253 device is a high-bandwidth FET

bus switch using a charge pump to elevate the gate

voltage of the pass transistor, providing a low and flat

ON-state resistance (ron). The low and flat ON-state

resistance allows for minimal propagation delay and

supports rail-to-rail switching on the data input and

output (I/O) ports.