SN74BCT541A

具有三态输出的 10 通道、4.5V 至 5.5V 缓冲器; • Operating Voltage Range of 4.5 V to 5.5 V\n• State-of-the-Art BiCMOS Design Significantly Reduces ICCZ\n• 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers\n• P-N-P Inputs Reduce DC Loading\n• Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs);

The SN54BCT541 and SN74BCT541A octal buffers and line drivers are ideal for driving bus lines or buffering memory-address registers. The devices feature inputs and outputs on opposite sides of the package to facilitate printed-circuit-board layout.\n\n The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1\\ or OE2\\) input is high, all eight outputs are in the high-impedance state.\n\n To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

SN74BCT541A

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541A

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541A

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADBR

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADW

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADW

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADW

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADWE4

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SN74BCT541ADWE4

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS