Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

文件：648.69 Kbytes 页数：38 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

文件：2.3978 Mbytes 页数：40 Pages

TI

德州仪器

Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

文件：377.83 Kbytes 页数：32 Pages

TI

德州仪器

单位双电源总线收发器

SN74AXCH1T45 是一款采用两个独立可配置电源轨的单比特位同相总线收发器。VCCA 和 VCCB 电源电压低至 0.65V 时，该器件可正常工作。A 端口用于跟踪 VCCA，该端口可支持 0.65V 至 3.6V 范围内的任何电源电压。B 端口用于跟踪 VCCB，该端口也可支持 0.65V 至 3.6V 范围内的任何电源电压。此外，SN74AXCH1T45 还与单电源系统兼容。\n\nDIR 引脚决定信号传播的方向。DIR 引脚配置为高电平时，信号转换由端口 A 流向端口 B。DIR 配置为低电平时，则由端口 B 流向端口 A。DIR 引脚以 VCCA 为基准，这意味着它的逻辑高电平和 • 完全可配置的双电源轨设计可允许各个端口在 0.65V 至 3.6V 的电源电压范围内运行\n• 无干扰电源定序\n• 最大静态电流 (ICCA + ICCB) 为 10µA（最高 85°C）和 16µA（最高 125°C）\n• VCC 隔离特性 \n• Ioff 支持局部关断模式运行\n• ESD 保护性能超过 JESD 22 规范要求 \n• 1000V 充电器件模型;

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器

SN74AXCH1T45 Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation, Tri-State Outputs, and Bus-Hold Inputs

1 Features • Fully Configurable Dual-Rail Design Allows Each Port to Operate With a Power Supply Range from 0.65 V to 3.6 V • Operating Temperature: –40°C to +125°C • Glitch-Free Power Supply Sequencing • Bus-hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors

文件：2.36295 Mbytes 页数：43 Pages

TI

德州仪器