SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

1 Features • AEC-Q100 qualified for automotive applications • Available in wettable flank QFN (WBQB) package • Fully-configurable dual-rail design allows each port to operate with a power supply range from 0.65 V to 3.6 V • Operating temperature from –40°C to +125°C • Multiple direction con

文件：2.556 Mbytes 页数：44 Pages

TI

德州仪器

SN74AXC4T245 Four-Bit Bus Transceiver with Configurable Voltage Translation and Tri-State Outputs

1 Features • Fully configurable dual-rail design allows each port to operate with a power supply range from 0.65V to 3.6V • Operating temperature from –40°C to +125°C • Multiple direction control pins to allow simultaneous up and down translation • Glitch-free power supply sequencing • Up

文件：2.49186 Mbytes 页数：41 Pages

TI

德州仪器

SN74AXC4T245 Four-Bit Bus Transceiver with Configurable Voltage Translation and Tri-State Outputs

文件：2.35198 Mbytes 页数：40 Pages

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

文件：296.47 Kbytes 页数：27 Pages

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

文件：582.92 Kbytes 页数：34 Pages

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

文件：1.47432 Mbytes 页数：36 Pages

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

文件：2.63138 Mbytes 页数：39 Pages

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

文件：3.02847 Mbytes 页数：44 Pages

TI

德州仪器

具有可配置电压转换和三态输出的汽车类 4 位双电源总线收发器

符合 AEC-Q100 标准的 SN74AXC4T245-Q1 器件是一款采用两个独立可配置电源轨的四位同相总线收发器。VCCA 和 VCCB 电源电压低至 0.65V 时，该器件可正常工作。A 端口用于跟踪 VCCA，该端口可支持 0.65V 至 3.6V 范围内的任何电源电压。B 端口用于跟踪 VCCB，该端口也可支持 0.65V 至 3.6V 范围内的任何电源电压。此外，SN74AXC4T245-Q1 还与单电源系统兼容。\n\nSN74AXC4T245-Q1 器件旨在实现数据总线之间的异步通信。根据方向控制输入（DIR1 和 2DIR）的逻辑电平，此器件将数据从 A 总线传输至 B 总 • 符合面向汽车应用的 AEC-Q100 标准\n• 完全可配置的双轨设计可允许各个端口在 0.65V 至 3.6V 的电源电压范围内运行\n• 多向控制引脚，支持同步升降转换\n• 从 1.8V 转换到 3.3V 时，支持高达 380Mbps 的转换速率\n• 如果任何一个 VCC 输入低于 100mV，则所有 I/O 输出均禁用且处于高阻抗状态\n• Ioff 支持局部断电模式运行\n• 闩锁性能超过 100mA，符合 JESD 78 II 类规范\n• 8000V 人体放电模型\n• 1000V 充电器件模型;

TI

德州仪器

SN74AXC4T245-Q1 Automotive 4-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and Tri-State Outputs

1 Features • AEC-Q100 qualified for automotive applications • Available in wettable flank QFN (WBQB) package • Fully-configurable dual-rail design allows each port to operate with a power supply range from 0.65 V to 3.6 V • Operating temperature from –40°C to +125°C • Multiple direction con

文件：2.556 Mbytes 页数：44 Pages

TI

德州仪器