SN74AVCH16T245GR.B中文资料德州仪器数据手册PDF规格书

1 Features

1• VCC Isolation Feature – If Either VCC Input is at

GND, Both Ports are in the High-Impedance State

• Control Inputs VIH/VIL Levels Are Referenced to

VCCA Voltage

• Overvoltage-Tolerant Inputs and Outputs Allow

Mixed Voltage-Mode Data Communications

• Fully Configurable Dual-Rail Design Allows Each

Port to Operate Over the Full 1.2 V to 3.6 V

Power-Supply Range

• I off Supports Partial-Power-Down Mode Operation

• I/Os are 4.6 V Tolerant

• Bus Hold on Data Inputs Eliminates the Need for

External Pullup and Pulldown Resistors

• Maximum Data Rates

– 380 Mbps (1.8 V to 3.3 V Level-Shifting)

– 200 Mbps (<1.8 V to 3.3 V Level-Shifting)

– 200 Mbps (Level-Shifting to 2.5 V or 1.8 V)

– 150 Mbps (Level-Shifting to 1.5 V)

– 100 Mbps (Level-Shifting to 1.2 V)

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– 8000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

2 Applications

• Personal Electronics

• Industrial

• Enterprise

• Telecom

3 Description

This 16-bit noninverting bus transceiver uses two

separate configurable power-supply rails. The

SN74AVCH16T245 device is optimized to operate

with VCCA/VCCB set at 1.4 V to 3.6 V. The device is

operational with VCCA/VCCB as low as 1.2 V. The A

port is designed to track VCCA. VCCA accepts any

supply voltage from 1.2 V to 3.6 V. The B port is

designed to track VCCB. VCCB accepts any supply

voltage from 1.2 V to 3.6 V. This allows for universal

low-voltage bidirectional translation between any of

the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage

nodes.