SN74AVC1T45-Q1 Automotive Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs

1 Features • Available in the Texas Instruments NanoFree™ package • Fully configurable dual-rail design allows each port to operate over the full 1.08V to 3.6V power-supply range • VCC isolation feature – if either VCC input is at GND, then both ports are in the high-impedance state • DIR

文件：858.53 Kbytes 页数：25 Pages

TI

德州仪器

SN74AVC1T45-Q1 Automotive Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs

1 Features • Available in the Texas Instruments NanoFree™ package • Fully configurable dual-rail design allows each port to operate over the full 1.08V to 3.6V power-supply range • VCC isolation feature – if either VCC input is at GND, then both ports are in the high-impedance state • DIR

文件：1.70836 Mbytes 页数：31 Pages

TI

德州仪器

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

文件：473.07 Kbytes 页数：22 Pages

TI

德州仪器

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

文件：612.92 Kbytes 页数：24 Pages

TI

德州仪器

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

文件：863.25 Kbytes 页数：26 Pages

TI

德州仪器

具有可配置电压转换和三态输出的单位双电源总线收发器

This single-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC1T45 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. It is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1 • Available in the Texas Instruments NanoFree Package\n• VCC Isolation Feature - If Either VCC Input Is At GND, Both Ports Are In The High-Impedance State\n• ±12-mA Output Drive at 3.3 V\n• Ioff Supports Partial-Power-Down Mode Operation\n• 320 Mbps (\n• ESD Protection Exceeds JESD 22 \n• 200-V Mach;

TI

德州仪器

SN74AVC1T45-Q1 Automotive Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs

1 Features • Available in the Texas Instruments NanoFree™ package • Fully configurable dual-rail design allows each port to operate over the full 1.08V to 3.6V power-supply range • VCC isolation feature – if either VCC input is at GND, then both ports are in the high-impedance state • DIR

文件：858.53 Kbytes 页数：25 Pages

TI

德州仪器

SN74AVC1T45-Q1 Automotive Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs

1 Features • Available in the Texas Instruments NanoFree™ package • Fully configurable dual-rail design allows each port to operate over the full 1.08V to 3.6V power-supply range • VCC isolation feature – if either VCC input is at GND, then both ports are in the high-impedance state • DIR

文件：1.70836 Mbytes 页数：31 Pages

TI

德州仪器

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

文件：612.92 Kbytes 页数：24 Pages

TI

德州仪器

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

文件：863.25 Kbytes 页数：26 Pages

TI

德州仪器