SN74AVC16373DGVRG4.B中文资料德州仪器数据手册PDF规格书

FEATURES

· Member of the Texas Instruments Widebus™

Family

· EPIC™ (Enhanced-Performance Implanted

CMOS) Submicron Process

· DOC™ (Dynamic Output Control) Circuit

Dynamically Changes Output Impedance,

Resulting in Noise Reduction Without Speed

Degradation

· Dynamic Drive Capability Is Equivalent to

Standard Outputs With IOH and IOL of ±24 mA at 2.5-V V CC

· Overvoltage-Tolerant Inputs/Outputs Allow

Mixed-Voltage-Mode Data Communications

· Ioff Supports Partial-Power-Down Mode

Operation

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

· Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

· Package Options Include Plastic Thin Shrink

Small-Outline (DGG) and Thin Very

Small-Outline (DGV) Packages

DESCRIPTION

A Dynamic Output Control (DOC™) circuit is implemented, which, during the transition, initially lowers the output

impedance to effectively drive the load and, subsequently, raises the impedance to reduce noise. Figure 1 shows

typical VOL vs IOL and VOH vs IOH curves to illustrate the output impedance and drive capability of the circuit. At

the beginning of the signal transition, the DOC circuit provides a maximum dynamic drive that is equivalent to a

high-drive standard-output device. For more information, refer to the TI application reports, AVC Logic Family

Technology and Applications, literature number SCEA006, and Dynamic Output Control (DOC™) Circuitry

Technology and Applications, literature number SCEA009.

This 16-bit transparent D-type latch is operational at 1.2-V to 3.6-V VCC, but is designed specifically for 1.65-V to

3.6-V VCC operation.

The SN74AVC16373 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers,

and working registers. This device can be used as two 8-bit latches or one 16-bit latch. When the latch-enable

(LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at

the levels set up at the D inputs.