OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mode Operation Sub 1-V Operable Max tpd of 1.9 ns at 1.8 V Low Power Consumption, 20-μA Max ICC ±8-mA Output Drive at 1.8 V Bus Hold on Data Inputs Eliminates th

文件：936.36 Kbytes 页数：14 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：199.82 Kbytes 页数：9 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：488.83 Kbytes 页数：13 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：415.13 Kbytes 页数：12 Pages

TI

德州仪器

具有总线保持和三态输出的 8 通道、0.8V 至 2.7V 高速缓冲器

This octal buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.\n\n The SN74AUCH244 is organized as two 4-bit line drivers with separate output-enable (OE)\\ inputs. When OE\\ is low, the device passes data from the A inputs to the Y ou • Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation\n• Ioff Supports Partial-Power-Down Mode Operation\n• Sub 1-V Operable\n• Max tpd of 1.9 ns at 1.8 V\n• Low Power Consumption, 20-µA Max ICC\n• ±8-mA Output Drive at 1.8 V\n• Bus Hold on Data Inputs Elim;

TI

德州仪器

丝印：MT244；Package：VQFN；OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mode Operation Sub 1-V Operable Max tpd of 1.9 ns at 1.8 V Low Power Consumption, 20-μA Max ICC ±8-mA Output Drive at 1.8 V Bus Hold on Data Inputs Eliminates th

文件：936.36 Kbytes 页数：14 Pages

TI

德州仪器

丝印：MT244；Package：VQFN；OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mode Operation Sub 1-V Operable Max tpd of 1.9 ns at 1.8 V Low Power Consumption, 20-μA Max ICC ±8-mA Output Drive at 1.8 V Bus Hold on Data Inputs Eliminates th

文件：936.36 Kbytes 页数：14 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：415.13 Kbytes 页数：12 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：488.83 Kbytes 页数：13 Pages

TI

德州仪器

OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

文件：488.83 Kbytes 页数：13 Pages

TI

德州仪器