SN74AUC2G79DCTR.B中文资料德州仪器数据手册PDF规格书

FEATURES

· Available in the Texas Instruments

NanoFree™ Package

· Optimized for 1.8-V Operation and Is 3.6-V I/O

Tolerant to Support Mixed-Mode Signal

Operation

· Ioff Supports Partial Power-Down-Mode

Operation

· Sub-1-V Operable

· Max tpd of 1.9 ns at 1.8 V

· Low Power Consumption, 10-mA Max ICC

· ±8-mA Output Drive at 1.8 V

· Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

· ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This single positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V VCC, but is designed

specifically for 1.65-V to 1.95-V VCC operation.

When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the

positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the

rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without

affecting the levels at the outputs.

NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the

package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.