SN74AUC1G74DCTR.B中文资料德州仪器数据手册PDF规格书

FEATURES

· Available in the Texas Instruments

NanoFree™ Package

· Optimized for 1.8-V Operation and Is 3.6-V I/O

Tolerant to Support Mixed-Mode Signal

Operation

· Ioff Supports Partial-Power-Down Mode

Operation

· Sub-1-V Operable

· Max tpd of 1.5 ns at 1.8 V

· Low Power Consumption, 10-μA Max ICC

· ±8-mA Output Drive at 1.8 V

· Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This single positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V VCC, but is designed

specifically for 1.65-V to 1.95-V VCC operation.

A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the

other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time

requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs

at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval,

data at the D input can be changed without affecting the levels at the outputs. To better optimize the flip-flop for

higher frequencies, the CLR input overrides the PRE input when they are both low.

NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the

package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.